Software Did Not Install - Dell All-in-One Wireless Printer P713w User Manual

3
Wipe the printhead contacts using a clean, lint-free cloth.
4
Reinsert the printhead, and then close the latch until it clicks.
5
Close the printer.
Note: If removing and reinserting the printhead does not resolve the error, then contact technical support.

Software did not install

If you encountered problems while installing, or if your printer does not appear in the list in the Printers folder or as
a printer option when sending a print job, then try removing and reinstalling the software.
Before you reinstall the software, do the following:
M
AKE SURE THAT YOUR COMPUTER MEETS THE MINIMUM SYSTEM REQUIREMENTS LISTED ON
THE PRINTER BOX
T
EMPORARILY DISABLE SECURITY PROGRAMS IN
C USB
HECK THE CONNECTION
1
Check the USB cable for any obvious damage. If the cable is damaged, then use a new one.
2
Firmly plug the square end of the USB cable into the back of the printer.
W
INDOWS BEFORE INSTALLING THE SOFTWARE
Troubleshooting
92