Pair For The �Rst Time - Philips Tat1109 User Manual

Insert the earpieces
1
Check left or right orientation of the
earpieces.
2
Insert the earpieces into the ears
and twist slightly until a secure �t is
achieved.
Pair the earpieces with
your Bluetooth device for
the �rst time
1
Make sure that the earpieces are fully
charged and powered off.
2
Open the cover of the charging case.
Take the earpieces out. The earpieces
are now in pairing mode and are
ready to pair with a Bluetooth device
(e.g. a mobile phone).
3
Turn on the Bluetooth function of
your Bluetooth device.
4
Pair the earpieces with your
Bluetooth device, refer to the user
manual of your Bluetooth device.
6 EN
Note
 After powering on, if the earpieces cannot �nd
any previously connected Bluetooth device, it
will automatically switch to pairing mode..
The following example shows you
how to pair the earpieces with your
Bluetooth device.
1
Turn on the Bluetooth function of
your Bluetooth device, select
Philips TAT1109.
2
Enter the earpieces' password "0000"
(4 zeros) if prompted. For those
devices featuring Bluetooth 3.0 or
higher, there is no need to enter a
password.
Single earpiece (Mono mode)
Take either right or left earpiece out
from charging box for Mono use. The
earpiece will power on automatically.
Note
 Take the second earpiece from the charging box
and they will pair with each other automatically.
Philips TAT1109