Get Started; Charge The Battery; How To Wear - Philips Tat1109 User Manual

3 Get started

Charge the battery

Note
 Before you use your headphones, place them in
the charging box and charge the battery for 2
hours for optimum battery capacity and
lifetime.
 Use only the original USB-C charging cable to
avoid any damage.
 If the headset is not used for a long time, the
rechargeable battery will begin to lose its
charge. To avoid this loss, please fully charge
the battery at least once every three months.
Charging Box
Plug one end of the USB-C cable into the
charging box and the other end into the
power source.
Tip
 The charging box serves as a portable backup
battery for charging the earpieces. When the
charging box is fully charged, it will fully
recharge the earpieces 3 times.
Earpieces
Take out insulating �lms under earpiece
and place earpiece back to charging case.
• The earpieces start charging and the
white LED light goes on
• When the earpieces are fully charged,
the white light will go off
Tip
 Normally, a full charge takes 2 hours (for the
earpieces or charging box) by USB cable.

How to wear

Select suitable silicone sleeves for
optimum �t
Different silicone sleeves cater for
different size of ears. choose one for the
best �t.
1
Test which silicone sleeves provide
you with the best sound and
wearing comfort.
2
3 sizes of silicone sleeves are
provided : large, medium, small.
5 EN