Ltroubleshooting - Electrolux Therma Line M 0A Ahobo Series Installation And Operating Manual

L TROUBLESHOOTING
L.1 Introduction
Certain faults may occur during normal use of the appliance. In
some cases, faults can be eliminated easily and quickly by
following the indication below.
The display, if present, could show a warning message
indicating a fault in progress.
If the fault persists, contact the Customer Care Service:
1. Disconnect the appliance from the main power supply;
2. Switch off the safety circuit breaker ahead of the
appliance;
L.2 Troubleshooting
Anomaly
Cannot use the appliance
ER1
ER2
ER3
M APPLIANCE DISPOSAL
WARNING
Refer to "WARNING and Safety
Information".
M.1 Procedure regarding appliance disposal
At the end of the product's life-cycle, make sure it is not
dispersed in the environment.
Different regulations are in force in the various countries,
therefore comply with the provisions of the laws and compe-
tent bodies in the country where appliance disposal takes
place.
The appliance's parts must be disposed of in a differentiated
way, according to their different characteristics (e. g. metals,
oils, greases, plastic, rubber, etc.).
Before disposing of the appliance, make sure to carefully
check its physical condition, and in particular any parts of the
structure that can give or break during dismantling.
26
3. Close the gas and water tap(s), if they are present;
4. Remember to specify:
• the type of fault
• the appliance PNC (product number code)
• the Ser. No. (appliance serial number).
Possible causes
No power from local mains
Faulty oven sensor
Faulty heat register sensor
Faulty core temperature sensor
(optional)
Depending on the model, the doors must be removed before
dismantling the appliance.
IMPORTANT
The appliance PNC and serial number are essential
for identifying the type of appliance and date of
manufacture.
Actions
Switch on the main fuse
Contact the Customer Care Service
The symbol on the product indicates that this
product should not be treated as domestic
waste, but must be correctly disposed of in
order to prevent any negative consequences
for the environment and human health. For
further information on the recycling of this
product, contact the local dealer or agent, the
Customer Care service or the local body
responsible for waste disposal.
NOTE!
When dismantling the appliance, any marking, this
manual and other documents concerning the appli-
ance must be destroyed.