Fixing The Side Cover Without Overhang; Sealing; Gelectrical Installation; Securing Or Adjusting To The Floor (Optional) - Electrolux Therma Line M 0A Ahobo Series Installation And Operating Manual

F.11

Fixing the side cover without overhang

The side cover should only be used as a closing off against the
wall, against a niche and in between appliances (provided that
these have the same dimensions). Standard cover has pre-
cuts that you can adapt to the appliances according to the left/
right side.
1. Fit the 4 cage nuts A into the dedicated slots on the frame.
A
2. Attach connecting rails C and D with the supplied screws
B.
Make sure marking on part C on the rail is pointing
forwards.
Bring the side panel E into position.
B
C
D
G ELECTRICAL INSTALLATION
G.1 Securing or adjusting to the floor
(optional)
If you need to secure it to the floor, the appliance comes with
compatible adjustable feet.
3. Insert the hooks on the bottom of end rail F into the eyelets
of the connecting rail.
Attach the side of side cover E using the 4 flathead screws
supplied.
4. Slide end rail F in the direction of the arrow to align it to the
front.
E
F.12

Sealing

For hygiene reasons, to prevent water and other substances
from running under the appliance, seal all around the joints
between the appliance and the wall or floor with permanently
elastic silicone.
We recommend you adjust the feet so you end up with a
working height of 900 mm. Level the unit with a spirit level.
A. Attaching the unit with screws
The feet have metal plates which may be secured to the
floor using screws .
F
E
F
21