Sony Cybershot,Cyber-shot DSC-T300 Instruction Manual page 12

[ To check the remaining battery charge
Press POWER button to turn on and check the remaining battery charge on the LCD screen.
Remaining
charge
indicator
Status
• If the NP-FD1 battery pack (not supplied) is used, the minute display (
the remaining charge indicator.
• It takes about one minute until the correct remaining charge indicator appears.
• The remaining charge indicator may not be correct under certain circumstances.
• The Clock Set screen appears when you turn on the camera for the first time (page 13).
[
To remove the battery pack/"Memory Stick Duo"
Open the battery/"Memory Stick Duo" cover.
"Memory Stick Duo"
Make sure that the access lamp is not lit,
then push the "Memory Stick Duo" in once.
• Never remove the battery pack/"Memory Stick Duo" when the access lamp is lit. This may cause damage
to data in the "Memory Stick Duo"/internal memory.
• Use the NP-BD1 battery pack (supplied) only with this camera.
12
Sufficient Battery
power almost fully
remaining charged
Battery half Battery low,
full recording/
playback
will stop
soon.
Battery pack
Slide the battery eject lever.
Be sure not to drop the battery pack.
Change the battery
with fully charged
one, or charge the
battery. (The warning
indicator flashes.)
60 Min) is also shown after