Wps - Sapido RB-1232 User Manual

N+ broadeband router
Hide thumbs Also See for RB-1232:
Table of Contents

Advertisement

5.2.6

WPS

Wi-Fi Protected Setup (WPS) is an easy way to establish a secured wireless network
between N+ Broadband Router and wireless card. Users do not need to manually entering a
creative, yet predictable security key on both Wi-Fi devices to prevent unwanted access to
their wireless network. With WPS, it can automatically configure a wireless network with a
network name (SSID) and strong WPA data encryption and authentication.
WPS can be enabled by 2 methods:
1.
PBC (Push button configuration) Method, in which the user simply has to push a
button, either an actual or a virtual one, on both WPS devices to connect.
2.
PIN (Personal Identification Number) Method, in which a PIN has to be taken either
from a sticker label or from the web interface of the WPS device. This PIN will then be
entered in the AP or client WPS device to connect.
Please follow instructions below to enable the WPS function.
Start PBC:
(1.) Press the WPS button from N+ Broadband Router or click Start PBC from menu
"Wi-Fi Protected Setup", and waiting for the WPS wireless card setting.
(2.) Open the "Wireless Utility" of your wireless card, and click its "PBC" button, to start
auto pairing.
http://www.sapido.com.tw
or
69
User' s Manual V1.0

Advertisement

Table of Contents
loading

Table of Contents