Sapido RB-1232 User Manual page 11

N+ broadeband router

Hide thumbs Also See for RB-1232:

Table of Contents

Step 4-1. For getting IP automatically if you are one of the users under N+ Broadband Router,

please skip Use the following IP address and then select Obtain an IP address

automatically and Obtain DNS server address automatically and then click on OK button.

Step 4-2. For getting IP manually in order to specify a Virtual Server, such as Print Server,

FTP Server and so on, please skip Obtain an IP address automatically and then select Use

the following IP address. And the following default setting of N+ Broadband Router should

be noted:

Note: If you configure your computer' s IP Address manually, it needs to be on the same

network segment.

For example:

 IP Address: 192.168.1.xxx (xxx can be any number between 2 and 253, but it can' t be

repeated, we use 100 to be the example.)

 Subnet Mask: 255.255.255.0

 Gateway: 192.168.1.1 (this is the IP address of N+ Broadband Router in Router Mode)

 DNS: 192.168.1.1 (use N+ Broadband Router' s IP address or on your own choice)

Note: IP address and Default gateway cannot be the same.

http://www.sapido.com.tw



IP Address: 192.168.1.10 (as your Print Server for example)



Subnet Mask: 255.255.255.0



Default Gateway: 192.168.1.1

User' s Manual V1.0

Table of Contents