Fax Setup; Changing The Fax Setup Options - Samsung SCX-6220 User Manual

10

Fax setup

This chapter gives you information on setting up your machine for
receiving and sending faxes.
This chapter includes:
•

Changing the fax setup options

• Changing the default document settings
• Printing sent fax report automatically
• Setting up Phone Book
Changing the fax setup options
Your machine provides you with various user-selectable options for
setting up the fax system. You can change the default settings for your
preferences and needs.
To change the fax setup options:
1 Press Fax.
2 Press Menu until Fax Setup appears on the bottom line of the
display and press OK.
3 Press the Scroll buttons to select Sending or Receiving and press
OK.
4 Press the Scroll buttons until the menu item you want appears and
press OK.
5 Press the Scroll buttons until the desired status appears or enter
the value for the option you have selected, and press OK.
6 If necessary, repeat steps 4 through 5.
7 Press Stop/Clear to return to Standby mode.
Sending options
Option
Redial Times You can specify the number of redial attempts. If
you enter 0, the machine will not redial.
Redial Term Your machine can automatically redial a remote
fax machine if it was busy. You can set an interval
between attempts.
Prefix Dial You can set a prefix of up to five digits. This
number dials before any automatic dial number is
started. It is useful for accessing a PABX
exchange.
Description
a
Option
b
ECM Mode This mode helps with poor line quality and makes
sure any faxes you send are sent smoothly to any
other ECM-equipped fax machine. Sending a fax
using ECM may take more time.
Send Report You can set your machine to print a confirmation
report showing whether a transmission was
successful, how many pages were sent, and
more. The available options are On, Off, and
On-Error, which prints only when a transmission
is not successful.
c
Image TCR You can prevent the actual faxed material from
being included in the confirmation report for
privacy or security protection.
Dial Mode This setting may not be available depending on
your country. If you cannot reach this option, your
machine does not support this feature.
You can set the dial mode for your machine to
either tone dialing or pulse dialing. If you have a
public telephone system or a private branch
exchange (PBX) system, you may need to select
Pulse. Contact your local telephone company if
you are not sure which dial mode to use.
Note
If you select Pulse, some phone system features
might not be available. It can also take longer to
dial a fax or phone number.
a. Private Automatic Branch Exchange
b. Error Correction Mode
c. Transmission Confirmation Report
Receiving options
Option
Receive Mode You can select the default fax receiving mode.
For details on receiving faxes in each mode, see
page 9.3.
Ring to Answer You can specify the number of times the machine
rings before answering an incoming call.
Stamp Receive This option allows the machine to automatically
Name print the page number, and the date and time of
reception at the bottom of each page of a
received fax.
Receive Start This code allows you to initiate fax reception from
Code an extension phone plugged into the EXT socket
on the back of the machine. If you pick up the
extension phone and hear fax tones, enter the
code. It is preset to *9* at the factory.
10.1
<Fax setup>
Description
Description