Samsung CLX-3170FN User Manual page 155

MESSAGE MEANING
Paper Jam 2 Paper has jammed In
the fuser area or
Check Inside
around the toner
cartridge
Refilled Toner The toner cartridge
you have installed is
not genuine or refilled.
The arrow indicates
which color toner
cartridge.
Replace Toner This message
appears between
Toner Empty and
Toner Low status.
Replace The life of the part
expires totally.
[xxx]
Replace The life of the part
expires soon.
[xxx] Soon
Replace/Install The life span of the
waste toner tank has
Toner Waste Bin
expired and the printer
will stop printing until
a new waste toner
tank is placed into the
machine.
Scan Unit Open The scan unit is not
securely latched.
Scanner locked The scanner module
is locked
Send Error There is a problem in
SMTP authentication.
(AUTH)
Send Error There is a problem in
DNS.
(DNS)
Send Error There is a problem in
POP3.
(POP3)
Send Error There is a problem in
SMTP.
(SMTP)
Send Error There is a problem on
the network interface
(Wrong Config)
card.
[Stop Pressed] Stop/Clear has been
pressed during an
operation.
SUGGESTED
SOLUTIONS
Clear the jam. (See "In
the paper exit area" on
page 55.)
The print quality may get
poor if the refilled toner
cartridge is installed,
since its characteristics
may significantly differ
from the genuine. We
recommend Samsung-
genuine color toner
cartridge.
Replace the toner
cartridge with a new one.
(See "Replacing the
toner cartridge" on
page 50.)
Replace the part with a
new one. Call for
service.
See "Checking
replaceables" on
page 53 and call for
service.
Replace the waste toner
bank with a new one.
(See "Replacing the
waste toner
container" on page 52.)
Close the scan unit it
locks into place.
Turn the power switch
off and on. If the problem
persists, call for service.
Configure the
authentication setting.
Configure the DNS
setting.
Configure the POP3
setting.
Change to the available
server.
Configure your network
interface card correctly.
Try again.
MESSAGE MEANING
Toner Empty The toner cartridge
has run out. The
machine stops
printing.
Press OK to toggle
the message to Stop
or Continue or Black
Only.
Stop
If the black
toner cartridge
is empty,
Black Only
message does
not appear.
Toner Exhausted The lifespan of the
toner cartridge which
the arrow indicates is
reached.
Toner Low The corresponding
toner cartridge is
almost empty.
Transfer Belt A problem has
occurred in the
Error
transfer belt in the
machine.
Tray There is no paper in
the tray.
Paper Empty
Tray The paper size
specified in the printer
Paper Mismatch
properties does not
match the paper you
are loading.
SUGGESTED
SOLUTIONS
You can select the
option among Stop,
Continue or Black Only
with the left/right arrow.
If you select Stop by
pressing OK on the
control panel, the
machine stops printing.
If you select Continue,
the machine keeps
printing, but the quality
cannot be guaranteed.
If you select Black Only,
the machine prints the
data in black. In this
case, the mono printing
feature is preset in the
printer properties.
When you copy, the
Black Start button will
be activated only with
this condition.
If you do not select any,
the machine will work as
Stop is selected.
Replace the toner
cartridge with a new one.
(See "Replacing the
toner cartridge" on
page 50.)
This message appears
when the toner is
completely empty, and
your machine stops
printing. Replace the
corresponding toner
cartridge with a
Samsung-genuine
cartridge. (See
"Replacing the toner
cartridge" on page 50.)
Take out the toner
cartridge and thoroughly
shake it. By doing this,
you can temporarily
reestablish printing
operations.
Turn the power switch
off and on. If the problem
persists, call for service.
Load paper in the tray.
Load the correct paper in
the tray.
Troubleshooting_ 58