Samsung CLX-3170FN User Manual page 135

6. Press Stop/Clear to return to ready mode.
Your original is divided into 9 portions. Each portion is
scanned and printed one by one in the following order:
Clone copying
Your machine can print multiple image copies from the original document on
a single page. The number of images is automatically determined by the
original image and paper size.
This copy feature is available only when you place originals on the scanner
glass.
1. Press Menu.
2. Press OK when Copy Menu appears.
3. Press OK when Copy Feature appears.
4. Press the left/right arrow until Layout appears and
press OK.
5. Press the left/right arrow until Clone Copy appears
and press OK.
6. Press Stop/Clear to return to ready mode.
You cannot adjust the copy size using the Reduce/Enlarge menu
while making a clone copy.
Erasing background images
You can set the machine to print an image without its background. This
copy feature removes the background color and can be helpful when
copying an original containing color in the background, such as a
newspaper or a catalog.
1. Press Menu.
2. Press OK when Copy Menu appears.
3. Press OK when Copy Feature appears.
4. Press the left/right arrow until Adjust Bkgd. appears and press OK.
5. Press the left/right arrow until the binding option you want appears.
• Off: Does not use this feature.
• Auto: Optimizes the background.
• Enhance Lev. 1 ~ 2: The higher the number is, the more vivid the
background is.
• Erase Lev. 1 ~ 4: The higher the number is, the lighter the
background is.
6. Press OK to begin copying.
7. Press Stop/Clear to return to ready mode.
Gray enhance copying
When you copy the original in gray scale, use this feature for the better
quality of copy-output. This feature is only for the copy in gray scale.
1. Press Menu.
2. Press OK when Copy Menu appears.
3. Press OK when Copy Feature appears.
4. Press the left/right arrow until Gray Enhance appears and press OK.
5. Press the left/right arrow to select On.
6. Press OK to begin copying.
7. Press Stop/Clear to return to ready mode.
SETTING COPY TIMEOUT
You can set the time the machine waits before it restores the default copy
settings, if you do not start copying after changing them on the control panel.
1. Press Menu, and then OK.
2. Press the left/right arrow until System Setup appears and press OK
3. Press OK when Machine Setup appears.
4. Press the left/right arrow until Timeout appears and press OK.
5. Press the left/right arrow until the time setting you want appears.
Selecting Off means that the machine does not restore the default
settings until you press Black Start or Color Start to begin copying, or
Stop/Clear to cancel.
6. Press OK to save your selection.
7. Press Stop/Clear to return to ready mode.
Copying_ 38