Download  Print this page

Inserting The Batteries In The Remote Control; Assembling The Stand-base - Samsung PS-42D7HD Owner's Instructions Manual

Hide thumbs


Inserting the Batteries in the Remote Control

Assembling the Stand-Base

English - 10
You must insert or replace the batteries in the remote control when you:
◆ Purchase the television
◆ Find that the remote control is no longer operating correctly
Remove the cover on the rear of the remote control by pressing
the symbol (
) upward and then pulling firmly to remove it.
Insert two R03, UM4, "AAA" 1.5V or equivalent batteries taking
care to respect the polarities:
◆ - on the battery against - on the remote control
◆ + on the battery against + on the remote control
Replace the cover.
Do not mix battery types, i.e. alkaline and manganese.
Remove the batteries and store them in a cool, dry place
if you won't be using the remote control for a long time.
The remote control can be used up to about 23 feet from the
(Assuming typical TV usage, the batteries last for about one year.)
If the remote control doesn't work!
Check the following:
1. Are the plus and minus ends of the batteries reversed?
2. Are the batteries drained?
3. Is there a power cut, or is the power cord unplugged?
4. Is there a special fluorescent light or a neon sign
Assemble the PDP with the stand and firmly secure the PDP using
4 screws provided.
Two or more people should carry the PDP. Never lay the
PDP on the floor because of possible damage to the screen.
Always store the PDP upright.


Table of Contents

   Related Manuals for Samsung PS-42D7HD

Comments to this Manuals

Symbols: 0
Latest comments: