Operation; Turning The Tv On And Off; Plug & Play Feature - Samsung PN42A450 User Manual

Operation

Turning the TV On and Off

Press the POWER button on the remote control.
You can also use the POWER button on the TV.
➢ It may take a while before you see a full picture.
Plug & Play Feature
When the TV is initially powered On, basic settings proceed automatically and subsequently:
The Screen Saver is activated if there is no operating signal for longer than 15 minutes.
➢
1 Press the POWER button on the remote control.
The message Menu language, Store Demo, Channels and Time will be set.
is displayed.
 Press the ENTER button to enter the language.
Press the ▲ or ▼ button to select language, then press the ENTER button.
The message Select "Home Use" when installing this TV in your home. is
automatically displayed.
 Press the ◄ or ► button to select Store Demo or Home Use, then press the
ENTER button.
We recommend setting the TV to Home Use mode for the best picture in
➢
your home environment.
➢ Store Demo mode is only intended for use in retail environments.
➢ If the unit is accidentally set to Store Demo mode and you want to return to
Home Use (Standard) : Press the Volume button. While the volume OSD is
displayed, press and hold the MENU button for 5 seconds.
➢ The Screen Saver is activated if there is no remote control key input for
longer than 1 minute while Plug & Play is running.
4 Press the ▲ or ▼ button to memorize the channels of the selected connection.
Press the ENTER button to select Start.
Air : Air antenna signal.
➢
Cable : Cable antenna signal.
Auto : Air and Cable antenna signals.
In Cable mode, you can select the correct analog signal source among
➢
STD, HRC, and IRC by pressing the ◄ or ► button, then press the ENTER
button. If you have Digital cable, select the signal source for both Analog and
Digital. Contact your local cable company to identify the type of cable system
that exists in your particular area.
Continued...
English - 16
Plug & Play
i
Menu language, Store Demo,
Channels and Time will be set.
Start
Plug & Play
Select the language of the OSD.
Language :
English
Español
Français
Move
Plug & Play
Select "Home Use" when installing this TV in your
home.
Home Use
Store Demo
Move
Plug & Play
Select the antenna to memorize.
Air Start
Cable
Start
Auto Start
Move Enter
Plug & Play
Selects a cable signal type for your location.
Analog
Start
STD
HRC
IRC
Digital
STD
HRC
IRC
Move Enter
Enter
Enter
Enter
Skip
Skip