Scanning And Switching Between Anynet+ Devices - Samsung LN40A650 User Manual

Scanning and Switching between anynet
. Press the toolS button.
Then press the EntEr
. Press the ▲ or ▼ button to select "Setup", then press the EntEr
. If you cannot find a device you want, press the ▲ or ▼ button to select "Searching
Connections", then press the EntEr
connection..." is displayed. When searching devices completes, the connected devices
are listed in the Anynet
Switching to the selected devices may take up to 2 minutes. You cannot cancel the
operation during the switching operation.
The time required to scan for devices is determined by the number of connected
devices.
When the device scan is complete, the number of devices found are not displayed.
Although the TV automatically scans devices when it is turned on using the PoWEr
button, devices connected when the TV is already on are not displayed in the device
list. In this case, select the "Searching Connections" menu to search devices.
If you have selected external input mode by pressing the SourCE button, you cannot
use the Anynet function. Make sure to switch to an Anynet+ device by using the
+
toolS button.
anynet menu
+
the anynet + menu changes depending on the type and status of the anynet + devices connected to the tV.
anynet + menu
View tV
record
(Device_name) menu
(Device_name) operation
Connect (Device_name)
receiver
Setup
tV remote Control buttons available in anynet
Device type
anynet + Device
Device with built-in tuner
audio Device
The Anynet + function only works when the active source on the TV remote control is set to TV.
The rEC button works only while in the recordable state.
You cannot control Anynet+ devices using the buttons on the TV. You can control Anynet + devices only using the TV remote
control.
The TV remote control may not work under certain conditions. In this case, reselect the Anynet + device.
The Anynet + functions do not operate with other manufacturers' products.
The , operations may differ depending on the device.
button to select "Anynet
button. The meassage "Configuring Anynet
menu.
+
Switches from Anynet + to TV broadcast mode.
Starts a recording. (This menu works only for a device supporting recording.)
Shows the menu of the connected device.
Example: When a DVD Recorder is connected, the DVD Recorder's title menu appears.
Shows the play control menu of the connected device.
Example: When a DVD Recorder is connected, the play control menu of the DVD
Recorder appears.
Your TV connects to the corresponding device.
Sound is output through the receiver (home theater).
You can set the Anynet + (HDMI-CEC), auto turn off, and searching connections for
using Anynet + .
After switching to the device, when the menu of the
corresponding device is displayed on the screen.
After switching to the device, while playing a file
After switching to the device, when you are watching a TV
program
When Receiver is activated
Devices
+
+
(HDMI-CEC)".
button.
Description
mode
+
operating Status
English - 
tV air 
View tV
Select Device 
record

+
menu on Device

Device operation

receiver :off

Setup 
move Enter
return
Setup
anynet+ (hDmI-CEC) :
auto turn off :
Searching Connections
move Enter
available buttons
Numeric buttons
▲/▼/◄/►/EntEr
Color buttons
ExIt button
(Backward search)
(Forward search)
(Stop)
(Play) /
Ch / button
Vol – / + button
mutE button
on

yes


return
buttons
(Pause)