Samsung LN19A330 User Manual page 23

Temporary image retention may occur when viewing a static image on the set
➣
for more than two hours.
After selecting "Zoom1", "Zoom2" or "Wide Fit":
➣
Press the ◄ or ► button to select "Position", then press the ENTER
Press the ▲ or ▼ button to move the picture up and down.
Reset: Press the ◄ or ► button to select "Reset", then press the ENTER
button. You can initialize the setting.
After selecting "Just Scan" in HDMI (1080i) or Component (1080i) mode:
➣
Press the ▲ or ▼ button to select "H-Position" or "V-Position", then press the
ENTER button.
Press the ◄ or ► button to adjust the screen Position. Press the
ENTER button.
Reset: Press the ▲ or ▼ button to select "Reset", then press the ENTER
button. You can initialize the setting.
HD (High Definition)
➣
16:9 - 1080i (1920x1080), 720p (1280x720)
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
➣
Input Source
TV, Video, Component (480i, 480p)
DTV(1080i), Component (1080i), HDMI (720p, 1080i)
PC
Alternately, you can press the P.SIZE button on the remote control repeatedly to
O
change the picture size.
16:
16:9
Sets the picture to 16:9 wide mode.
Wide Fit U Move
Wide Fit
Enlarges the aspect ratio of the picture
to fit the entire screen.
Zoom1 U Move
Zoom1
Magnifies the size of the picture on the
screen.
4:
4:3
Sets the picture to 4:3 normal mode.
English - 21
TV
16 : 
Zoom1
Zoom2
button.
Wide Fit
4 : 
Just Scan
TV
H-Position
V-Position
Reset
Picture Size
16:9, Zoom1, Zoom2, 4:3
16:9, 4:3, Wide Fit, Just Scan
16:9, 4:3
Zoom2 U Move
Zoom2
Magnifies the size of the picture more
than "Zoom1".
Just Scan
Just Scan
Use the function to see the full
image without any cutoff when HDMI
(720p/1080i), Component (1080i) or
DTV (1080i) signals are input.
Size
Position Reset
Adjust Enter Return
Just Scan
0
0
Move Enter Return