Related Manuals for Jensen of Scandinavia WiFi 6
Summary of Contents for Jensen of Scandinavia WiFi 6
- Page 1 How to reconnect Omni WiFi 6 nodes OMNI WiFi 6 AX3000 WiFi 6 Mesh System OMNI WiFi 6 lite AX1500 WiFi 6 Mesh System Norsk version 1.0 - November 2024 - © CBK Distribusjon AS...
- Page 2 If any of your Omni WiFi 6/lite nodes are not connected to the main node, you can easily add them by following these instructions. If an Omni WiFi 6 node is not connected, you will see that the LED light is either blinking green or is solid red.
- Page 3 WiFi 6 Mesh System Step 1 - Resetting the Omni node you want to add 1 - Connect the power supply to the Omni WiFi 6 (lite) node and wait for 1 minute before proceeding. 2 - Press and hold the MESH button until the LED light flashes red, then release.
- Page 4 WiFi 6 Mesh System Step 2 - Pairing the node 1. Ensure that the Omni WiFi 6 (lite) node is powered on and either blinking green or solid red before proceeding to step 2. 2. Press and hold the MESH button on the new node you want to add for 1 second.
- Page 5 OMNI WiFi 6 WiFi 6 Mesh System CBK Distribusjon AS Gneisveien 30 2020 Skedsmokorset Norway www.Jensenscandinavia.com...
Need help?
Do you have a question about the WiFi 6 and is the answer not in the manual?
Questions and answers