Plug & Play Feature - Samsung HL-50A650 User Manual

Plug & Play Feature
The first time you turn on your new TV, choose your basic settings for language, input source and channels, and
time of day using the plug and play feature. The TV will store these settings in memory. Storing the channels in
memory will allow you to scan the stored channels rather than have to enter their digits each time you want to
change channels.
When the TV is initially powered on, basic settings proceed automatically:
1 Press the POWER button on the remote control.
The message Menu Language, Store Demo, Channels and Time will be set.
is automatically displayed.
 Press the ENTER button to enter the language.
Press the ▲ or ▼ button to select language, then press the ENTER button.
The message Select 'Home Use' when installing this TV in your home. is
automatically displayed.
 Press the ◄ or ► button to select Store Demo or Home Use, then press the
ENTER button.
The default selection is Home Use.
➢
We recommend setting the TV to Home Use for the best picture in your
➢
home environment.
➢ Store Demo mode is only intended for use in retail environments.
➢ If the unit is accidentally set to Store Demo mode and you want to return
to Home Use (Standard): Press the Volume button on the TV. When the
volume OSD is displayed, press and hold the MENU button on the TV for 5
seconds.
4 Press the ▲ or ▼ button to memorize the channels of the selected connection,
then press the ENTER button.
Air: Air antenna signal.
➢
Cable: Cable antenna signal.
Auto: Air and Cable antenna signals.
➢ In Cable mode, you can select the correct analog signal source among
STD, HRC, and IRC by pressing the ◄ or ► button, then press the ENTER
button. If you have Digital cable, select the signal source for both Analog
and Digital. Contact your local cable company to identify the type of cable
system that exists in your particular area.
English - 1
Plug & Play
Menu Language, Store Demo, Channels and Time will
be set.
OK
Plug & Play
Select Language of the OSD.
Menu Language : English
Plug & Play
Select Language of the OSD.
English
Español
Menu Language : English
Français
Move
Plug & Play
Select 'Home Use' when installing this TV in your home.
Store Demo Home Use
Move
Plug & Play
Select the Antenna source to memorize
Air
Cable
Auto
Move Enter
Plug & Play
Selects the cable system.
Analog
STD HRC
Digital
STD HRC
Start
Move Enter
Continued...
Enter
►
Enter
Enter
Enter
Start
Start
Start
Skip
IRC
IRC
Skip