chicco one4ever Lounge Manual

WARNINGS

READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.

BEFORE USE, REMOVE AND DISPOSE OF ALL PLASTIC BAGS AND PACKAGING MATERIALS AND KEEP THEM OUT OF REACH OF CHILDREN.

The adaptors can only be used with the One4Ever stroller.

Only CHICCO KORY I-SIZE car seats can be installed on these adaptors.

Before use, check correct fixing of the adaptors to the frame of the stroller.

Before use, make sure that the child car seat or carry cot is correctly fitted on the ₆ adaptors by pulling up on the car seat or carry cot.
Keep adaptors out of reach of children when they are not in use.

ADVICE FOR CLEANING AND MAINTENANCE

Cleaning and maintenance operations must only be carried out by an adult.

CLEANING
After possible contact with water, dry the metal parts in order to avoid the formation of rust. Do not use solvents or abrasive products to clean the plastic components. After use, keep the adaptor in a dry place.

INSTALLING AND USING ADAPTORS WITH THE CHICCO KORY I-SIZE CAR SEAT

Position the adaptors on the frame of the stroller by inserting the plastic component into the joint on the stroller (Fig. 1).

Once the two adaptors have been properly mounted on either side, the stroller is ready to be attached to the child car seat (Fig. 1A).

To install the CHICCO KORY i-Size car seat, insert the car seat's lateral connectors into the previously mounted adaptors (Fig. 2-2A).

The car seat should be fixed only and exclusively forward-facing. To remove the CHICCO KORY i-Size Car Seat, press the buttons under the handle on both sides and pull upwards on the handle (Fig. 2B).

DISASSEMBLING THE ADAPTORS

The stroller can be closed with the adaptors installed on the frame.

To remove the adaptors press the button and pull up (Fig. 3).