Cautions And Warnings; Installation Details; Physical Location & Temperature Considerations; Usage Guidelines - Pioneer Kuro KRP-500M Operating Instructions Manual

Cautions and Warnings

08
8 Cautions and Warnings
Your flat panel display is designed for a long and productive life. To keep your panel at peak performance, there
are a few things that can help. This section provides general information and specific warnings to help you
maintain the flat panel display at top quality throughout its lifetime.
Note: If you do not intend to use your flat panel display for an extended period, occasionally power on and run the
panel to maintain functionality.

8.1 Installation Details

It is best to use parts and accessories designed by Pioneer. Use of accessories other than the Pioneer stand or
installation brackets may result in instability and cause injury. For custom installations, please speak with your
dealer or expert installer before attempting to install your high-end flat panel display. These professionals are
familiar with proper installation techniques including ventilation.
Using the unit without proper ventilation may cause the internal temperature to rise, resulting in a possible
malfunction. When the surrounding environmental or internal temperature exceeds a certain degree, the display
automatically powers off in order to cool the internal electronics and prevent a hazardous situation.
A malfunction can be caused by a single issue such as ventilation or by a combination of factors. Pioneer is not
responsible for accidents or damage caused by using parts and/or accessories manufactured by other
companies, inadequate installation sites, poor stabilization practices, erroneous installation methods,
operational mistakes, site remodeling, or natural disasters.
For more installation information, refer to the following bullet points:
• Confirm that panel vents are not partially obstructed or completely blocked.
• Use a vacuum cleaner set to its lowest suction setting to clean dusty vents.
• Distance the panel from the wall, other equipment, etc. (for minimum space requirements, refer to "2.3
Check the Location for Suitability")
• Do not fit the unit inside of narrow spaces where ventilation is poor.
• Do not drape, seat, or enclose the panel in any material such as blankets, loose cloth, or carpeting as this
could block the panel vents.
• Use a proper mount or stand rather than leaning the panel against a wall or other support.
• Do not place the product on a rug or blanket.
8.2 Physical Location & Temperature Considerations
Condensation may form on the surface or inside of the display when the panel is moved from a cold place to a
warm room or just after a heater or air conditioner is switched on. If condensation forms, do not turn on the flat
panel display until all moisture evaporates. Powering on the display when there is condensation may damage the
panel or cause a malfunction.

8.3 Usage Guidelines

For maximum enjoyment of your Pioneer flat panel display, read the following information carefully.
Over the course of the flat panel display's lifetime, as with all phosphor-based screens including standard tube-
type TVs, the luminosity of the screen diminishes very slowly. Also, static pictures shown over an extended period
can adversely affect the screen image. To enjoy bright and beautiful pictures for many years to come, please apply
the following guidelines.
• Set the flat panel display to Standby when it is not being used.
• Avoid leaving a still image or frequently showing the same picture on the screen (e.g. closed-captioned
images, games with static portions, etc.).
• Hide the On Screen Display (OSD) from a DVD player, VCR, or other device when not in use.
• Do not leave a picture freeze-framed or paused for long periods.
• Avoid showing a picture with very bright and very dark areas on the screen for extended lengths to time.
84
En