Pioneer Kuro KRP-500M Operating Instructions Manual page 83

Flat panel display
Hide thumbs Also See for Kuro KRP-500M:
Table of Contents

Advertisement

Available languages

Available languages

Helpful Information
KURO LINK
Issue
Brightness on sides of
screen are uneven
IP Control
Issue
Web browser screen
does not open after
entering the correct IP
Address
The indicator lights but
the web browser screen
does not open
Entering an IP Address
fails even after activating
the DHCP function
No list appears on the
left of the Web control
system screen
If the information above fails to solve the issue, please contact a Pioneer-authorized service representative. Do
not attempt to service the panel yourself. Opening or removing covers exposes you to possible electrical shock
and other dangers as well as possibly voiding your warranty. Request a qualified service professional to check
your flat panel display.
Some situations that require a service professional are as follows:
• panel dropped or damaged
• power cord or plug damaged
• liquid spilled or an object dropped into the panel
• exposed to rain or water
• noticeable abnormality in panel operation
Occasionally a part within the flat panel display may fail. Verify that your service professional uses only
replacement parts specified by Pioneer or by those with the same characteristics and performance as the original
parts. Use of unauthorized parts can result in fire, electric shock, or other danger. Upon completion of any service
or repair work, request that the service professional perform safety checks to ensure that the product is operating
properly.
If you need more assistance or have a Service/Parts-related question, please contact the Pioneer Service
organization at (800) 421-1625.
• Display content that completely fills the screen until unevenness is minimized.
• Change the AV mode setting.
• Confirm that the indicator turns on after setting the LED option to On.
• Check the cable connection if the indicator does not light.
• Confirm that the other end of the cable is properly connected to the PC, hub or router if
the indicator does not light.
• Confirm that the other end of the cable is not connected to any other device than
Ethernet (such as a telephone).
• When using a DHCP, confirm that the IP Address allocated by the server has not
changed (the address may change as a DHCP server reallocates the addresses
periodically).
• Confirm that the DHCP server is activated within the network.
• Restart the browser, enter a URL in the address bar then re-open the initial Web control
system screen.
Possible Solutions
Possible Solutions
07
83
En

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Krp 500m - 50" lcd flat panel display

Table of Contents