Control A Recorder; Control A Player - Pioneer Kuro KRP-500M Operating Instructions Manual

Use Other Equipment With Your Flat Panel Display
During playback, use the remote control's up/down arrows (/ ) to cycle through the surround sound options.
Use the left/right arrows (/ ) to change the input. To resume playback, return to the KURO LINK menu then
select the function again.
AV Systems
1 Cycles the surround mode in sequence
2 Switches the input source in reverse order
3 Switches the surround mode in reverse order
4 Closes the screen to return to KURO LINK
menu
5 Lists the connected equipment
(model number/up to eight characters)
6 Switches the input source in sequence
7 Reserved/Void
6.4.2

Control a Recorder

Press ENTER to start playback or press KURO LINK to return to the menu. This process also applies to Players.
Refer to the chart below for available commands.
1 Skips commercials
2 Fast reverse
3 Stops playback
4 Closes the screen to return to KURO LINK
menu
5 Lists the connected equipment
(model number/up to eight characters)
6 Fast forward
7 Starts playback
Note: You can also use  (Play),  (Stop),  (Pause),  (Fast Forward) and  (Fast Reverse) on the remote
control to conduct the same operations as the control menu buttons.
6.4.3

Control a Player

Press ENTER to start playback or press KURO LINK to return to the menu. This process also applies to Recorders.
Refer to the chart below for available commands.
1 Displays the DVD/Blu-ray disc menu on the
player
2 Fast reverse
3 Stops playback
4 Closes the screen to return to KURO LINK
menu
5 Lists the connected equipment
(model number/up to eight characters)
6 Fast forward
7 Starts playback
Note: You can also use  (Play),  (Stop),  (Pause),  (Fast Forward) and  (Fast Reverse) on the remote
control to conduct the same operations as the control menu buttons.
Recorders
Players
KURO LINK
****
1
SURROUND+
INPUT- INPUT+
2
SURROUND-
3
Exit
4
KURO LINK
****
1
2
3
Exit
4
KURO LINK
****
1
MENU
2
3
Exit
4
5
6
7
5
6
7
5
6
7
06
63
En