Automatic Programming - Beko 4700 Spa Operating Instructions Manual

Semi-automatic programming
This mode allows a manual start time but an automatic switch off
time, which is very useful to prevent the over cooking of food.
* Press" "4 * button. Press the "+" (or "-") buttons, to set the
cooking time duration (Auto and" €" will be displayed) in minutes.
* Set the oven thermostat knob to the required temperature and
function selection knob to the desired position.
* The oven will switch on and cooking will commence.
* The programmer will switch the oven off at the end of the preset
cooking time. "Auto" will flash and the timer alarm will bleep.
To turn off the alarm press the "C3" button.
* Set the oven thermostat knob to the "@"% (off) mark.
* Press "W" button to cancel "Auto".
Automatic programming
The programmer will switch the oven on and off at the required
times.
Ensure the oven thermostat is in "@" (off) position, and the correct
time has been set.
* Press the "WÙ" button to cancel any program stored. (Auto and
ar HA oe
tS" symbol will not be displayed)
* Press the "ts" button and press "+" (or ) buttons, to set
the stop time required. ( #5 and auto will be displayed)
ai rr
* Press the "<3" button and press " - " button to set the cooking
time (duration) required.
* Set the oven knob to the required cooking temperature and place
your food in the oven,
* The oven will switch on at the required time, cook the food and
switch off at the predetermined time.
* At the end of cooking the alarm will bleep and "Auto" will
flash. To turn off the alarm press the "5" button.
it rr
16