From Network - Via The Web; From Usb Drive - Via Software Download - Logicube WriteProtect PORTABLE User Manual

6.1.1 From Network – Via the web
1. Disconnect all drive cables and drives from the WriteProtect.
2. Connect the WriteProtect to a network with Internet access. Set the
3. Using the Remote Connectivity feature (see
4. From the main menu on the WriteProtect, click the down arrow once
5. Select From Network. The WriteProtect will check for a newer version
6. Click the Update icon to begin the update. A confirmation screen will
7. Do not interrupt the update process. It may take several minutes. Once
8. Reboot the WriteProtect by turning the unit off then back on using the
9. Remotely connect to the WriteProtect again, then verify the software
6.1.2 From USB Drive – Via software download
The latest software can also be downloaded from Logicube's website and be
placed onto a USB flash drive.
Download the latest software from the WriteProtect's product support page at
http://www.logicube.com/knowledge/WriteProtect
1. Download the zip file from the download page.
2. Extract the contents of the downloaded zip file to the root of the USB
3. Disconnect all drive cables and drives from the WriteProtect.
4. From the main screen, click the Software Updates icon.
WriteProtect PORTABLE
Logicube
proxy settings (IP settings) if necessary.
The WriteProtect is DHCP
enabled by default.
Remote Connectivity), connect to the WriteProtect.
then click the Software Updates icon. A screen will appear showing the
current version of software installed towards the top of the screen.
on the web. If one is found, it will display the version on the screen and
the Update icon will be selectable.
appear. Click Yes to continue the update.
completed, a 'Successful' screen will appear.
Power button.
version at the top of the 'Software Updates' screen.
It is recommended to use an empty
USB flash drive.
flash drive (the file must not be in any folder). Do not connect the USB
flash drive yet. The WriteProtect will display a message when to connect
the USB drive.
User's Manual
27
SOFTWARE UPDATES
Section 4.0 for details on