Logicube WriteProtect PORTABLE User Manual page 22

•
•
•
Profiles allow users to create different profiles. The profile can then be saved.
When a profile is loaded using the Load icon, that profile will be used during its
boot process.
For example, if the user wants to change the Export Type from Fixed Drive to
Removable and have that setting be used every time the WriteProtect is turned
on, the setting must be changed then a profile needs to be added, saved, and
loaded:
1. Turn the WriteProtect off then back on. This will reset all settings to its
2. Go to the System Settings tab and in the USB Device tab, set the Export
3. Go to Profiles tab and click the New icon.
4. Type a name for this profile. For example, removable and click the OK
5. Click the newly saved profile and click Save. A confirmation screen will
6. Click the Yes icon to save the profile.
7. Make sure the profile to be loaded (during the boot process) is
WriteProtect PORTABLE
Logicube
New – Allows the user to create a new profile name.
Save – Saves the selected profile.
Load – Loads the selected profile.
The WriteProtect will boot with the profile that has an
asterisk (*) next to the name.
default profile. This is an important step to help ensure only the
changes desired will be the changes saved.
Type to 'Removable'.
icon. The profile name should appear on the screen.
appear:
highlighted (in this case, REMOVABLE.DB) and click the Load icon. A
confirmation screen will appear:
User's Manual
16
WEB INTERFACE