Setting The Aspect Ratio - Mitsubishi Electric HC6000 User Manual

Viewing video images (continued)

Setting the aspect ratio

You can change the aspect ratio of the input video signal (or the ratio of width to height of the image). Change the
setting according to the type of the input video signal.
Original image size
4:3 image (480i,
576i, 480p, 576p,
and PC)
Squeezed 4:3
(480i, 576i, 480p,
576p)
4:3 CinemaScope
(480i, 576i, 480p,
576p)
Sub Title
4:3 Vista image
(480i, 576i, 480p,
576p)
16:9 image
(720p, 1080i,
1080p)
• Bold frames are recommended modes.
• When ASPECT is set to AUTO, an optimum aspect ratio is automatically selected depending on the input signal.
• When ASPECT is set to ZOOM1 or ZOOM2, display position can be changed with
control.
• OVER SCAN in the SIGNAL menu is not available in the STRETCH mode.
• Display pattern changes according to the setting of SCREEN SIZE in the IMAGE menu. The table above is in the
case of "16:9."
• This projector is equipped with a function to change the aspect ratio. If you select an aspect ratio that is
inconsistent with that of the input signal, images around the screen edges may be hidden or deformed. When
viewing original video works refl ecting the authors' intentions, you are recommended to keep their aspect ratios
unchanged.
• It may be an infringement of the rights protected by the copyright law to project images compressed or enlarged
by changing the aspect ratio in public areas, such as inside and outside shops and hotels, for commercial or
public viewing purposes.
• When SCREEN SIZE of ADVANCED MENU is set to CINEMA SCOPE(2.35:1) in the IMAGE menu, STRETCH
cannot be selected for ASPECT.
4:3 16:9
Aspect ratio Squeezed image is
changes
expanded to 16:9.
depending on the
input signal.
Sub Title
Sub Title
EN-20
: Signal size
ZOOM1 ZOOM2
CinemaScope image is Vista image is enlarged
enlarged and displayed and displayed together
together with subtitles. with subtitles.
Sub Title
Sub Title
or
: Image area
STRETCH
Image is enlarged to
16:9 while the center
aspect ratio remains
unchanged.
Sub Title
button on the remote