Specifi Cations - Mitsubishi Electric LDT461V User Manual

Specifi cations
Specifi cations (LDT461V)
Product Specifications
LCD Module
Pixel Pitch:
Resolution:
Brightness:
Contrast Ratio:
Response time:
View Angle:
Design View Distance:
Frequency Horizontal:
Pixel Clock
Viewable Size
Input Signal
PC-Input:
Input-terminal:
VIDEO Input:
AUDIO Input:
RS-232C:
Output Signal
PC-Output:
Output-terminal:
VIDEO Output:
AUDIO Output:
Speaker Output:
RS-232C:
Resolutions Supported
Power Supply
Power Consumption
Power Save:
Operational Temperature:
Environment
Storage Temperature:
Environment
Dimension Net without stand:
Net with stand:
Weight Net without stand:
Net with stand:
Wall mounting interface
Complied Regulatory
and Guidelines
Power Management
Plug & Play
Accessories
Note: Technical specifications are subject to change without notice.
Analog Input
Diagonal:
46" / 116.8 cm
0.53025 mm
1920 x 1080 dots
Color:
Over 16 million colors (depending on video card used)
450 cd/m2 (typ.)
1500:1 (typ.)
6 ms (typ. G to G)
Up and Down 176°, Left and Right 176° (typ.) @CR>10
1100 mm / 43.34 inches
15.625 / 15.734, 31.5 - 91.1 kHz
Vertical: 50.0 / 58.0 - 85.0 Hz
13.5 -165.0 MHz
1018.08 x 572.67 mm / 40.1 x 22.5 inches
Video:
Analog RGB Video: 0.7 Vp-p
Input impedance 75 ohm
Sync:
Separate HV sync: TTL level (Pos./Neg.), Sync-on-green, Composite Sync (0.3Vp-p)
Input Impedance 2.2K ohm
BNC (R,G,B,H,V), 15 Pin Mini D-sub
Composite: 1.0 Vp-p
Input impedance 75ohm BNC and RCA-PINJACK-INPUT
Y/C Y: 1 Vp-p C: 0.286 Vp-p Input
Impedance 75 ohm S-TERMINAL-INPUT
Component: 1.0 / 0.7 Vp-p
Input Impedance 75 ohm BNC-INPUT
RCA PIN-JACK L/R INPUT x 2, STEREO Mini Jack INPUT x 1
In:
9 Pin Mini D-sub
Video:
Analog RGB Video: 0.7 Vp-p with 75 ohm terminated
Sync:
Separate HV sync: TTL level (Pos./Neg.)
15 Pin Mini D-sub
BNC-OUTPUT x 1, Composite 1.0 Vp-p with 75 ohm terminated
RCA PIN-JACK L/R OUTPUT x 1, 0.15 Vrms with 47k ohm terminated
External Speaker Jack 7 W + 7 W (8 ohm)
Out:
9 Pin Mini D-sub
640 x 480 at 60 Hz to 85 Hz
800 x 600 at 50 Hz, 60Hz to 85 Hz
1024 x 768 at 50 Hz, 60Hz to 85 Hz
1280 x 768 at 50 Hz, 60Hz to 85 Hz
1360 x 768 at 50 Hz, 60Hz to 85 Hz
1280 x 1024 at 60Hz to 85 Hz
1600 x 1200 at 60 Hz
1920 x 1080 at 60Hz*
* Recommended Resolution
NTSC,PAL,SECAM,4.43NTSC,PAL60 Component:480i,480p,720p,1080i,1080p
3.2 - 1.38 A @100 - 240 V AC, 50 / 60 Hz
Max 285 W
Less than 5 W (Power button OFF/Main power switch ON)
Landscape: 5 - 40 °C / 41-104 °F, Portrait : 5 - 35 °C / 41 - 95 °F
Humidity:
20 - 80 % (Without condensation)
-20 - 60 °C / -4 - 140 °F
Humidity:
10 - 90% (Without condensation)/90%-3.5%x(Temp-40°C) regarding over 40°C
1122 mm (W) x 663 mm (H) x 136.3 mm (D) / 44.17" (W) x 26.1" (H) x 5.37" (D)
1122 mm (W) x 703.1 mm (H) x 404.7 mm (D) / 44.17" (W) x 27.68" (H) x 15.93" (D)
Gross:
1285 mm (W) x 885 mm (H) x 275 mm (D) / 50.59" (W) x 37.84" (H) x 10.83" (D)
72.6 lbs / 33.0 kg (Approximately)
76.1 lbs / 34.6 kg (Approximately)
Gross:
94.6 lbs / 43.0 kg
12 Holes (100 mm pitches)
Optional Multi-purpose Fix Mount
UL60950-1/C-UL/TUV-GS/EN60950-1/FCC-B/DOC-B/EN55022-B
EN55024/EN61000-3-2/EN61000-3-3/C-Tick/CE/BSMI/GOST/PSB
VESA DPM
VESA DDC2B, DDC/CI
User's Manual, Power Cord, Video Signal Cable, Remote Controller, AAA Battery x 2,
Clamper x 2 (To prevent from falling), Clamper x 2 (For securing cables),
Screw for Main switch cover x 2, Screw for CLAMPER x 2, Cable Holder x 2,
Main switch cover, Stand x 2, Thumbscrew for stand x 4
English-37
Digital Input
25.0 -165.0 MHz
TMDS
HDMI