Temp Alarm; Door Alarm; Max Cool; User Preferences - Maytag Ice2O MFI2568AES Use And Care Manual

Using the Controls
Notes:
• Door openings will not deactivate Vacation Mode
for approximately one hour after activation.
• If vacationing for more than a few days, see the
Preparing for Vacation section, page 25.

Temp Alarm

The Temp Alarm system is designed to alert you if
the freezer or refrigerator temperatures exceed
normal operating temperatures due to a power outage or
other event.
To Activate:
Press the Temp Alarm pad once. The Temp Alarm
indicator light will illuminate.
To Deactivate:
Press and hold the Temp Alarm pad for three seconds.
The indicator light will go off. If the alarm is not actively
showing an alarm condition, then the temp alarm pad
does not need to be held down for three seconds.
An Audible Alarm will sound repeatedly if the freezer or
refrigerator temperatures have exceeded normal operating
temperatures. The temperature display will alternately
show the current compartment temperatures and the
highest compartment temperatures reached when the
power was out, doors left slightly ajar, or system failures.
To Turn Off the Audible Alarm:
Press the Temp Alarm pad once. The Temp Alarm
indicator light will continue to flash and the temperatures
will alternate until the temperatures have stabilized.

Door Alarm

The Door Alarm feature will alert you when one of
the doors has been left open for approximately
three minutes. When this happens, the Door Alarm light
will flash and an audible alarm will sound.
To Activate:
Press the Door Alarm pad once. The Door Alarm
indicator light will illuminate.
To Deactivate:
Press the Door Alarm pad once. The indicator light will
go off.
To Turn Off the Audible Alarm:
Press the Door Alarm pad once OR close the door.
Note:
The light bulbs will all turn off if any door is
left open for six continuous minutes. Shutting all
three doors for one second will cause light bulbs to
come back on.
11

Max Cool

The Max Cool feature is automatically activated
and the indicator light illuminates. This feature
provides the ability to cool down the refrigerator and
freezer after extended door openings or when loading
either compartment with warm food. This feature
causes the refrigerator and freezer temperatures to
drop to the minimum seetings on the control.
Important: When the Max Cool feature is in operation,
the and pads for the Refrigerator and Freezer
controls will not operate.
To Activate:
Press the Max Cool pad once. The Max Cool indicator
light will illuminate.
To Deactivate:
Press the Max Cool pad once. The indicator light will
go off.
Max Cool will deactivate automatically after 2 hours.

User Preferences

Access the User Preferences menu to:
• Change the temperature display from °F to °C.
• Enable or disable audible alarms.
• Adjust the light level at which the Dispenser Auto
Light will illuminate when this feature is activated on
the ice and water dispenser.
• Activate the Sabbath Mode.
To access the User Preferences menu, press and hold
the Door Alarm pad for three seconds. When in the
User Preferences mode, a short title for the feature will
appear in the Freezer temperature display and the
feature status will appear in the Refrigerator display.
1. Use the Freezer
through the features.
2. When the desired feature is displayed, use the
Refrigerator and
status.
3. When changes are complete, press the Door Alarm
pad for three seconds.
Temperature Display (F_C)
Change the display to show temperatures in degrees
Fahrenheit or degrees Celsius.
Alarm (AL)
When the Alarm mode is off, all tones will be disabled
until the feature is turned on (alarms are still enabled).
Auto Light Level Selection (LL)
This setting adjusts the light level at which the
dispenser light will illuminate when the sensor detects
and control to scroll
control to change the