Advertisement
Quick Links
Advertisement
Related Manuals for Philips HAL5023
Summary of Contents for Philips HAL5023
- Page 1 User Manual Soundbar HAL5023...
- Page 2 Soundbar HAL5023 Applicable for xxHFL5x14, xxHFL6x14, xxBFL2x14...
- Page 3 TP Vision Belgium NV cannot be held responsible neither for any errors in the content of this document nor for any problems as a result of the content in this document. Errors reported to Philips will be adapted and published on the Philips support website as soon as possible.
- Page 4 Description This document is to explain the changes in TV related to the soundbar HAL5023/xx than can be bought as an accessory for xxHFL5x14/xx, xxHFL6x14/xx, xxBFL2x14/xx. The TV will not have the same functionality with any other soundbar as HAL5023/xx.
- Page 5 You can also secure the soundbar with a cable (included). This cable can be connected to the soundbar and can be connected to the VESA screws of the TV. 2. TV software version If the TV is already installed or you plan to install it, you will need to update the TV SW version to TPM181HE_R.205.002.023.001 (EU/AP) or TPM191HN_R.
- Page 6 4. Changes in the professional menu Using the supplied HDMI cable to connect the soundbar to the HDMI ARC input on the supported product (xxHFL5x14, xxHFL6x14, xxBFL2x14), the soundbar will automatically go into a professional mode. More details about this can be found in the ‘Profession mode on the soundbar’ chapter. In the “Professional menu”...
- Page 7 Bluetooth Settings – Bluetooth Guest Access – Bluetooth Audio” to “Soundbar”, the “Bluetooth Audio” will be visible in the dashboard menu. You will also see the device in the source list, here it will be called “HAL5023”. This will replace automatically the “HDMI x” source name and will have a Bluetooth speaker icon.
- Page 8 If you set “Professional settings – Input control – Bluetooth Settings – Bluetooth Guest Access – Bluetooth Audio” to “Off”, the “Bluetooth Audio” will not be shown in the dashboard. This means you will not be able to connect to Bluetooth. Note that also the icon in the source list is different if Bluetooth is disabled.
-
Page 9: Bluetooth Connection
This can be done by making a Bluetooth connection by going to “Bluetooth Audio” in the menu or to “HAL5023” in the source list. Below screen will be shown. - Page 10 You can use the arrow keys on the remote to navigate right to go “Next”. If you go to the next step a waiting animation will be shown while setting up the Bluetooth connection. You will see that no device is connected as well as the Bluetooth device name you can search for and PIN code you can connect to.
- Page 11 You can also see 2 icons on the bottom of the screen. The left on, “Screen Off” is to turn the TV screen off so you can stream audio to the soundbar without having the TV display enabled. By pressing any button on the remote control, the display will be enabled again.
- Page 12 Once you are streaming audio from a connect device you will see this on the screen. Depending on the streaming status the message might be different.
- Page 13 7. Soundbar behaviour and reset of the settings Once the soundbar is connected to TV and it’s enabled in the professional setting it will follow the TV behaviour related to standby and wakeup. Also the switch on settings will be applied on the soundbar like “TV speakers”, “Sound Style”...
- Page 14 All registered and unregistered trademarks are property of their respective owners. Specifications are subject to change without notice. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured and is sold under the responsibility of TP Vision Europe B.V., and TP Vision Europe B.V.is the warrantor in relation to this product.
Need help?
Do you have a question about the HAL5023 and is the answer not in the manual?
Questions and answers