Related Manuals for osily OSPH1000E-WIFI
Summary of Contents for osily OSPH1000E-WIFI
- Page 1 SLIMLINE PANEL HEATERS WITH LED DISPLAY & WI-FI CONTROL Installation And Operation Instructions Model Number OSPH1000E-WIFI/ 1500E-WIFI / 2000E-WIFI www.osily.co.uk V1 PS 0424...
- Page 2 Thank you for purchasing this Osily Convector Heater. Please read these instructions before installation or operation and leave with the appropriate person for future retention. OSPH1000E-WIFI / 1500E-WIFI / 2000E-WIFI Slimline Panel Heater Installation & Operating Instructions 5 mm 57 mm IMPORTANT SAFETY INFORMATION WARNING: In order to avoid overheating, do not cover the heater.
-
Page 3: Setting The Heater
250mm above the floor. Do not install the heater in a draught likely to affect the control setting. Do not locate the heater in any area that may store or contain paint, fuel or other flammable liquids. & www.osily.co.uk V1 PS 0424... - Page 4 2 slots of the bottom parts of the wall brackets in the wall heater’s rear enclosure then pull up the heater. Then engage 2 slots of the upper parts of the wall bracket and tighten the 2 screws in order to lock the device. www.osily.co.uk V1 PS 0424...
-
Page 5: Touch Controls
Touch Controls On/off button Set temperature or timer display Timer button High heat Power setting Low heat Temperature setting (-) Room temperature display Temperature setting (+) Child lock icon Child lock Wi-Fi icon Main power icon www.osily.co.uk V1 PS 0424... -
Page 6: Remote Controls
Remote Controls 1. On/Off button 4. Time control button 2. Power setting button 5. Child lock function button 3. Temperature control button www.osily.co.uk V1 PS 0424... - Page 7 The wire that is coloured BROWN must be connected to the terminal marked with the letter L The wire that is coloured GREEN/YELLOW must be connected to the terminal marked with the letter E or symbol www.osily.co.uk V1 PS 0424...
-
Page 8: Operation
Note: The operating instructions above apply to both the Remote Control supplied with the heater and the Controls/Display on the front of the heater. www.osily.co.uk V1 PS 0424... - Page 9 (see below). Press “Add” then tap the + icon. Once the radiator is successfully connected it will appear on the app. Press icon to change the name of the radiator or “Done” to return to the Home screen. www.osily.co.uk V1 PS 0424...
- Page 10 Note: The Smart Home Assistant services supported by the TuyaSmart App may change as it is a 3rd party App Service. Any services that may be removed are the responsibility of TuyaSmart developers and not Osily. www.osily.co.uk V1 PS 0424...
-
Page 11: Reset To Default Settings
The coating of you radiator ensures perfect and unalterable protection. To clean it, use only a neutral detergent (cleaner or non-abrasive solvent). The thermostat housing is made of plastic. do not use solvents for maintenance. Any repair must be carried out by the manufacturer, it’s representatives or by the after-sales service. www.osily.co.uk V1 PS 0424... -
Page 12: Warranty
TECHNICAL SPECIFICATION Model OSPH1000E-WIFI OSPH1500E-WIFI OSPH2000E-WIFI Voltage 220-240V AC /50Hz... - Page 13 ERP INFORMATION Model OSPH1000E-WIFI OSPH1500E-WIFI OSPH2000E-WIFI Nominal heat output (Pnom/kW) Minimum heat output (indicative) (Pnom/kW) Maximum continuous heat output (Pmax.c/kW) At nominal heat output (elmin/kW) At minimum heat output (elmin/kW) In standby mode (elSB/W) 0.00106 0.00106 0.00106 Distributed by YESSS Electrical UK, YESSS House, Foxbridge Way, Normanton, West Yorkshire, WF6 1TN Telephone: 01924 227940 www.osily.co.uk...
- Page 14 UK PSTI STATEMENT OF COMPLIANCE Osily as manufacturer, hereby declare, that the below product(s) covered in this document are in conformance with the applicable security requirements in Schedule 1 of The Product Security and Telecommunications Infrastructure (Security Requirements for Relevant Connectable Products) Regulations 2023 (“Security Requirements”).
Need help?
Do you have a question about the OSPH1000E-WIFI and is the answer not in the manual?
Questions and answers