Download
Share
Print this page
  1. Manuals
  2. Brands
  3. TMG Manuals
  4. Shelters
  5. TMG-DT3020C
  6. Product manual

TMG -DT3020C Product Manual

Dual truss storage container shelter
Hide thumbs

Advertisement

Quick Links

Download this manual
www.tmgindustrial.com
0/13
Toll Free:1-877-761-2819

Advertisement

loading
Need help?

Need help?

Do you have a question about the TMG-DT3020C and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for TMG TMG-DT3020C

Summary of Contents for TMG TMG-DT3020C

  • Page 1 www.tmgindustrial.com 0/13 Toll Free:1-877-761-2819...

  • Page 2: Main Specifications

    MAIN SPECIFICATIONS : Overall assembled size : W9.15 x L6 x H4 (m) / W30 x L19.7 x H13.1 (ft)   Width : 9.15m / 30ft  Length : 6m / 19.7ft  Ridge peak height : 4m / 13.1ft + container height PRIOR TO ASSEMBLY Please go through the whole instruction manual completely.
  • Page 3 FRAME STRUCTURE DIAGRAM. www.tmgindustrial.com 2/13 Toll Free:1-877-761-2819...

  • Page 4: Installation Steps

    Be aware of the surrounding area. Do not set up the building near snowdrifts, open flames or exposed electrical wires. Do not keep heat sources near the fabric cover. Keep the building surroundings clear at all times. Check the parts list below to make sure all parts are received prior to assembly. TMG-DT3020C PART LIST GRAPHICAL DESCRIPTION...
  • Page 5 Base plate for front and rear W210xL340mm trusses right corners Roof purlin L3040mm (horizontal tube) Ridge steel tension cables L3600mm (front and rear trusses) Cable connection plate L91mm Top cover tension tube L1993mm (for both bottom sides) Top cover tension tube L2230mm (for both bottom sides) Roof fabric tarp cover...
  • Page 6 STEP 2 : BASEPLATE POSITIONING. PART www.tmgindustrial.com 5/13 Toll Free:1-877-761-2819...
  • Page 7 STEP 3 : INSTALLATION OF FRONT AND REAR 2 GROUP TRUSSES. PART PART 12x2 www.tmgindustrial.com 6/13 Toll Free:1-877-761-2819...
  • Page 8 STEP 4 : INSTALLATION OF MIDDLE 1 GROUP TRUSS. PART PART www.tmgindustrial.com 7/13 Toll Free:1-877-761-2819...
  • Page 9 STEP 5 : WRAP (#21) AROUND THE SHARP POINTS OF THE JOINT TO AVOID FRICTION BETWEEN THE FABRIC AND THE INTERFACE. PART www.tmgindustrial.com 8/13 Toll Free:1-877-761-2819...
  • Page 10 STEP 6 : INSTALL THE FIRST TWO TRUSSES. PART PART www.tmgindustrial.com 9/13 Toll Free:1-877-761-2819...
  • Page 11 STEP 7 : INSTALL ALL OTHER TRUSSES. PART PART www.tmgindustrial.com 10/13 Toll Free:1-877-761-2819...
  • Page 12 STEP 8 : INSTALL THE TOP COVER (#15) STRETCH AND TIGHTEN TOP COVER. DO NOT INSTALL THE COVER DURING WINDY WEATHER!  Unpack the top cover and place it along one of the short sides of the structure. Use 3 to 5 ropes to pull the cover over the top of the structure, from the inside 2 or 3 people standing inside on ...
  • Page 13 STEP 9 : INSTALL RATCHET STRAPS. Stretch and adjust the cover from left and right, to make sure it is square and centered. Cut the groove pocket  where it aligns with ratchet (#23), and use strap (#23A) to pull tension tube (#7.#7A.#24) toward the ratchet and tie it firmly there.

  • Page 14: After The Installation

    AFTER THE INSTALLATION Walk around and inspect the building periodically to make sure all components are still firmly secured and the whole building is well supported. Check all bolts and nuts as well as all connection points to make sure they are all in good position.