First / Second / Third Boot Device
These items allow you to set the sequence of boot devices where BIOS attempts to
load the operating system.
MSI Reminds You...
Available settings for "First / Second / Third Boot Device" vary de-
pending on the bootable devices you have installed. For example, if
you did not install a floppy drive, the setting "Floppy" will not show up.
Security Option
This specifies the type of BIOS password protection that is implemented. Settings are
described below:
Option
Description
[Setup]
The password prompt appears only when end users try to run
Setup.
[System]
A password prompt appears every time when the computer is
powered on or when end users try to run Setup.
Full Screen LOGO Show
This item enables you to show the company logo on the bootup screen. Settings are:
[Enabled]
[Disabled]
Shows a still image (logo) on the full screen at boot.
Shows the POST messages at boot.
4-11
Chapter 4 - BIOS Setup