Download  Print this page

Entering Setup; Selecting The First Boot Device - MSI Hetis 945 User Manual

Msi hetis 945: users guide.
Hide thumbs


4.1 Entering Setup

Power on the computer and the system will start POST (Power On Self Test) process.
W hen the message below appears on the screen, press <DEL> key to enter Setup.
If the message disappears before you respond and you still wish to enter Setup,
restart the system by turning it OFF and On or pressing the RESET button. You may
also restart the system by simultaneously pressing <Ctrl>, <Alt>, and <Delete> keys.

Selecting the First Boot Device

You are allowed to select the 1st boot device without entering the BIOS setup utility
by pressing <F11>. W hen the same message as listed above appears on the screen,
press <F11> to trigger the boot menu.
The POST messages might pass by too quickly for you to respond in time. If so,
restart the system and press <F11> after around 2 or 3 seconds to activate the boot
menu similar to the following.
Hard Disk
The boot menu will list all the bootable devices. Select the one you want to boot from
by using arrow keys and then pressing <Enter>. The system will boot from the
selected device. The selection will not make changes to the settings in the BIOS setup
utility, so next time when you power on the system, it will still use the original first
boot device to boot up.
DEL: Setup Menu
Select First Boot Device
F11: Boot Menu


Table of Contents

   Also See for MSI Hetis 945

   Related Manuals for MSI Hetis 945

This manual is also suitable for:

Hetis 945 liteMs-6410

Comments to this Manuals

Symbols: 0
Latest comments: