1040 DIMM (bottom slot)
For access, remove these FRUs in order:
v "1010 Battery pack" on page 87
v "1030 DIMM slot cover" on page 89
Table 13. Removal steps of DIMM (bottom slot)
90
ThinkPad T510, T510i, and W510 Hardware Maintenance Manual
Note: If only one DIMM is used on the computer you are servicing, the card
must be installed in SLOT-0 ( a ), but not in SLOT-1 ( b ).
When installing: Insert the notched end of the DIMM into the socket. Press the
DIMM firmly, and pivot it until it snaps into the place. Make sure that it is
firmly fixed in the slot and does not move easily.
a
1
2
1
b