Cleaning The Food Processor; Troubleshooting; Continued On Next Page - KitchenAid KFP710 Instructions And Recipes Manual

Cleaning the Food Processor

WARNING
Cut Hazard
Handle blades carefully.
Failure to do so can result in cuts.
1. Press the OFF button.
2. Unplug the Food Processor
before cleaning.
3. Wipe the base and cord with a warm,
sudsy cloth, and wipe clean with a
damp cloth. Dry with a soft cloth.
Do not use abrasive cleansers or
scouring pads.
4. All the other parts of the Food
Processor are dishwasher safe. Be
sure to load them away from exposed
heating elements in the dishwasher.
If washing the Food Processor
parts by hand, avoid using abrasive
cleansers or scouring pads. These
could scratch or cloud the work bowl
• If your Food Processor should fail
to operate, check the following:
– Make sure the work bowl and the
work bowl cover are properly locked
on the base.
– See if the Food Processor is plugged
into a proper electrical outlet. If it is,
unplug the Food Processor.
WARNING
Fire Hazard
Do not use an extension cord.
Doing so can result in death
or fire.
5. To prevent damage to the bowl
6. Wrap the power cord around the

Troubleshooting

– Plug in Food Processor.
– If Food Processor still does not work,
• If your Food Processor should slice
– Make sure the correct raised-blade
13
and cover. Thoroughly dry all parts
after washing.
interlock system, always store the
work bowl and work bowl cover in the
unlocked position when not in use.
work bowl. Secure the plug by
clipping it to the cord.
check the fuse or circuit breaker on the
electrical circuit the Food Processor is
connected to and make sure the circuit
is closed.
instead of shred (or vice versa)
when using the reversible disc:
side of the disc is positioned face up
on the disc stem. For Slicing, position
the single raised-blade side up. For
Shredding, position the multiple raised-
blades side up.

Continued on next page