Setting Up The Hands-Free Phone - Kenwood KVT-532DVD Instruction Manual

Setting Up the Hands-Free Phone

The Hands-Free system can be set as follows.
1 Display the Hands Free Setup screen
2 Setup each item
2
3
4
5
7
8
9
10
11
1 Moves to the "Hands Free Setup 2" screen.
2 Sets an automatic response time after call
termination. (
"Off": This function can not use.
"0-99": Sets to calling ring time (second).
3 Sets a ringing tone output position.
( "Front R")
"Front L": Outputs the tone from the front
left-hand side speaker.
"Front R": Outputs the tone from the front
right-hand side speaker.
"Front All": Outputs the tone from the both
front speakers.
4 Sets the beep of the incoming call.
( "ON")
"ON": Beep is heard.
"OFF": Beep is canceled.
1
6
12
"8")
5 Sets the beep of the incoming SMS.
( "ON")
"ON": Beep is heard.
"OFF": Beep is canceled.
6 Returns to the Hands-Free Control screen.
7 Returns to the "Hands Free Setup 1" screen.
8 Sets whether to use cell-phone phonebook,
outgoing calls list and incoming calls list.
( "ON")
"ON": Yes.
"OFF": No.
9 Sets the SMS function. (
"ON": Use SMS function.
"OFF": SMS not available.
p Registers the voice to select phone number
category with voice recognition.
See <Key Word Voice Registration> (page
55).
q Registers the phone number to Hands Free
Control screen preset button.
See <Phone Number Preset> (page 56).
w Returns to the Hands-Free Control screen.
⁄
• Either the time interval for automatic answer set on this
unit or the time interval set on the cell-phone, whichever
is shorter, takes effect.
• Select the speaker which is further from the microphone
in order to prevent howling or echoes.
"ON")
English 53