Table of Contents
Advertisement
F
Select the time zone.
A Press rt to move the arrow to "TIME ZONE", then
press ENTER.
B Press rt to select "AUTO" or the desired time zone,
then press ENTER. Each time you press rt, the time
zone changes as follows:
AUTO{ATLANTIC{EASTERN{CENTRAL{
{
MOUNTAIN{PACIFIC{ALASKA{HAWAII{
(back to the beginning)
NOTE:
If an incorrect time is displayed by the Plug & Play function, you
may be receiving the clock setting data of a PBS channel from an
adjacent time zone or from an incorrect PBS channel from a
cable TV system. If you selected "AUTO" for the host channel in
step D, be sure to select the correct time zone manually.
G
Complete the Semiauto Clock Set.
Press SET UP to return to normal screen.
IMPORTANT:
Turn off the unit after performing Semiauto Clock. "AUTO"
will appear on the front display panel while the clock is
being set. The current clock time will appear automatically
when the clock setting is complete.
AUTO DAYLIGHT SAVING TIME
This function enables automatic adjustment of the unit's
clock at the start and end of Daylight Saving Time.
With Auto DST activated, —
— on the first Sunday of April at 2:00 AM, the clock is
adjusted to 3:00 AM.
— on the last Sunday of October at 2:00 AM, the clock is
adjusted to 1:00 AM.
NOTE:
Timer recording may not function correctly at the time
Daylight Saving Time is adjusted.
Manual Clock Set
A
Access the Main Menu screen.
Press SET UP.
B
Access the "CLOCK SET" screen.
A Press w e to select
"INITIAL SET UP", then
press ENTER.
B Press w e to select
"CLOCK SET", then press
ENTER.
C
Set "AUTO CLOCK" to "OFF".
A Press rt to move the
arrow to "AUTO CLOCK",
then press ENTER.
B Press rt to select "OFF",
then press ENTER.
D
Set time, date and year.
A Press rt to move the arrow to "TIME", then press
ENTER.
B Press rt until the desired time appears, then press
ENTER. Set the date and year in the same way.
● Holding rt changes the time in 30-minute intervals, or
changes the date in 15-day intervals.
E
Select D.S.T. mode.
A Press rt to move the arrow to "D.S.T.", then press
ENTER.
B Press rt to select the desired setting, then press
ENTER.
ON:
Adjustment will be made by the built-in clock
itself.
OFF:
Select when Daylight Saving Time does not apply
to you.
F
Start clock.
Press SET UP and normal screen appears.
25
EN
Advertisement
Table of Contents
