Audio Menu - Hitachi CP-WX625 User Manual – Operating Manual

AUDIO Menu

AUDIO Menu
From the AUDIO Menu, items shown in the table below
can be performed.
Select an item using the ▲/▼ cursor buttons on the
projector or remote control, and press the ► cursor button
on the projector or remote control, or ENTER button on
the remote control to execute the item. Then perform it
according to the following table.
NOTE
• The speaker sound may distorted or the case may be trembling when
the volume is too high or treble/bass is emphasized or WOW is activated. In that
case, make the volume reduced, bass/treble low or WOW effect to be weakend.
Item
VOLUME
TREBLE
BASS
SRS WOW
SPEAKER
AUDIO
HDMI AUDIO
38
Using the ▲/▼ buttons adjusts the volume.
High ó Low
Using the ▲/▼ buttons adjusts the treble level.
High ó Low
Using the ▲/▼ buttons adjusts the bass level.
High ó Low
Using the ▲/▼ buttons switches the mode for SRS WOW mode.
HIGH ó MID ó OFF
• SRS WOW® accomplishes this by providing a panoramic three-
dimensional audio image that extends the sound field in both the
horizontal and vertical planes, and lowers the perceived bass
response well beyond the low frequency limitations of the drivers.
Adjust it depending on the user's preference.
Using the ▲/▼ buttons turns the speaker function on/off.
TURN ON ó TURN OFF
• When the TURN ON is selected the built-in speaker works.
Allocates the audio ports.
(1) Choose a picture input port using the ▲/▼ buttons.
QUIT ó RGB1 ó RGB2 ó HDMI ó COMPONENT
AUDIO OUT STANDBY ó VIDEO ó S-VIDEO
(2) Select the audio port to be interlocked with
the input port using the ◄/► buttons.
1 ó 2 ó 3 ó 4 ó
• H is abbreviation of HDMI.
• H can be selected for HDMI port only. When H
is selected, the audio signal to HDMI port will be
output if HDMI is chosen as a display source.
• disables the audio output.
• When is selected to VIDEO, S-VIDEO or COMPONENT port, the C.C. (Closed
Caption) is automatically activated, if the C.C. is set to AUTO in the DISPLAY Menu
of the C.C. Menu and the signal from the input port supports the C.C. feature (62).
The HDMI AUDIO is set to 1 as default. In case the HDMI audio
does not work well, try 2.
1 ó 2
Description
ó H