Shopsmith Mark V Table System Retrofit Kit Manual

Introduction
NOTE
Refer to the Parts List in the Owners Manual
for part numbers, parts explosions, and
descriptions of parts.
The Mark V Table System Retrofit Kit was
designed to offer the user increased wood-
working capabilities. The added benefits of
this kit include:
Worktable (P/N 518421) - The worktable has
additional table surface, is grooved to reduce
drag and friction, has positive trunnion stops
at 45 right and 90 left and has double locking
o o
front and rear trunnions. There are T-slots in
the Table for Miter Gauge.
Extension Tabletop (P/N 518498) - The exten-
sion tabletop has additional table surface and
is grooved to reduce drag and friction.
Carriage (P/N 514328) - The carriage has a
quarter turn lock and table height adjustment
crank. Also, included with you r carriage is
the Stop Ring, 516667.
Lower Saw Guard (P/N 514358) - The lower
saw guard is usable with the 12" sanding disc,
Dado and Molding Heads, as well as all 10"
circular saw blades. Also, you can hook up
your shop vacuum for dust free sanding and
sawing operations.
Upper Saw Guard (P/N 514366) - The upper
saw guard is mounted on a riving knife that is
permanently aligned and remains only 1/8"
away from the blade. The riving knife and
Mark V Table System
anti-kickback cams provide improved kick-
back protection without marring your wood.
Rip Fence (P/N 518418) - The rip fence has
separate front and rear locks to properly se-
cure the fence during horizontal boring and
sanding operations. The fence also has t-slots
for mouting accessories.
Miter Gauge and Quick Clamp (P/N 514554
& P/N 555125) - The new miter gauge bar is
configured for use in the new tabletop T-slots,
giving more stability during operations. The
new Quick-Clamp assembly is easily and
quickly adjusted.
Tool Rest Arm and Post (P/N 514492) - The
tool rest arm has two mounting positions to
pro-vide increased rigidity for large diameter
workpieces, as well as quick release levers for
eay, tool free adjustments.
ALSO, included are:
• 845444 - MKV 520 Owner's Manual
• 770108 - Setup and Alignment Video
555130 - 1-1/4" Saw Arbor
•
• 514493 - Disc Sander Hub
• 521097 - Setup Gauge
• 521106 - Fence Straddler
• 51368603 - 5/32" Allen wrench
• 51368605 - 3/32" Allen wrench
51368608 - 5/16" Allen wrench
•
Headstock Labels
•
Retrofit Kit
500 to Pro System