URBAN OUTFITTERS HARPER FLOOR LAMP Assembly Instructions

HARPER FLOOR LAMP
Assembly Instructions
NO ADDITIONAL TOOLS REQUIRED
WARNINGS:
Do not throw away packing materials and carton until after assembly.
Ensure all parts are present prior to assembly.
Contact customer service immediately if parts are missing.
Assemble all parts on a clean smooth surface.
Use (2) two MAX 40W Type A incandescent bulbs.
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight.
Do not place over heat or air conditioning vents.
Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills with a clean white cloth, do not rub.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.
PARTS INCLUDED:
(A) Finial
(F) Socket
(J) Base
06.26.2024
(B) (D) Plastic Washer
[D20xT1.0mm] x2
(G) Upper Pole
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.© 2017 UO,
Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
(C) Shade
(H) Middle Pole
(E) Shade Stem
(I) Lower Pole
Page 1 of 2