Download Print this page

HP PCL 5 User Manual: Configuration Command (appletalk)

Hp pcl 5 printer-accessory: user guide.
Hide thumbs


Configuration Command (AppleTalk)

The Configuration command allows a user to send PCL jobs to the
printer over AppleTalk. This data is sent in the form of "key/value" data
pairs (refer to "AppleTalk Configuration" below for more information).
Default = 0
Range = 0 - 32767
[key] can be 1 character through 32765 characters.
[value] can be 1 character through 32765 characters.
AppleTalk Configuration
The HP LaserJet 4 printer can be configured to receive PCL print jobs
over an AppleTalk connection using the Configuration command. The
HP LaserJet 4 MIO AppleTalk interfaces support three key values:
RENAME, JOB, and TYPE. These keys are used for configuring an
installed LocalTalk or EtherTalk MIO card to allow PCL print jobs
generated by a Macintosh host to be printed.
&b#W [key]<sp>[value]
# = Number of data bytes that follow command
Printer-Specific Differences 2-7


   Also See for HP PCL 5

This manual also for:

3200se - laserjet all-in-one b/w laser 3300mfp - laserjet b/w laser 1220 - laserjet b/w laser 3015 - laserjet b/w laser 3030 - laserjet b/w laser 3330mfp - laserjet b/w laser... Show all

Comments to this Manuals

Symbols: 0
Latest comments: