Summary of Contents for Forever Redwood FRED & WILMA'S FAVORITE COFFEE TABLE
Page 1
619-639-7503 or 619-677-1965 -Direct Lines for the Engineering Department 7am – 5pm Pacific Time, Monday - Friday ASSEMBLY INSTRUCTIONS FOR THE FRED & WILMA'S FAVORITE COFFEE TABLE...
Page 2
NOTE: To assemble your product, you need a Hammer, a Ratch, a Drill, and an impact drill. For bigger structures, a forklift may be needed too. Required Tools (Are not included in your hardware packing). PROCESS TO INSTALL THE HARDWARE PROVIDED. To install the bolts.
Page 3
To install the lag bolts. Place the washers in their lag bolts. After that, insert the lag bolts into the holes and carefully tighten it using a ratchet with the necessary socket. Use the washers only for the Wood Pieces. To install the deck screws.
Page 4
CONTENT OF BOXES Qty. Description Drawing Tabletop Legs Note: Part numbers in the Content of Boxes Table are for reference only. These do not match to the numbers marked on the parts sent. MRE-Formato-4-7-043 Rev. A NCDOCT0623-096...
Page 5
DESCRIPTION Tabletop Legs Note: Part numbers in the Drawing are for reference only. These do not match to the numbers marked on the parts sent. MRE-Formato-4-7-043 Rev. A NCDOCT0623-096...
HARDWARE LIST Qty. Description Drawing 3/8” x 12” lag bolts 3/8” washers HARDWARE ASSEMBLY GUIDE Step 2: Place the Table upside down. After that, use 3/8” x 12” lag bolts (LB1) to attach the legs (2) to the Tabletop (1). Each part has a series of numbers that indicate where to attach the part with the corresponding number.
Page 7
Step 1: Step 2: MRE-Formato-4-7-043 Rev. A NCDOCT0623-096...
Page 8
This completes the coffee table assembly. Hope you enjoy your set for many decades. If you ever have a problem or a question, don't hesitate to call us (619-639-7503 or 619-677-1965) or email us. We are here to support you. MRE-Formato-4-7-043 Rev.
Need help?
Do you have a question about the FRED & WILMA'S FAVORITE COFFEE TABLE and is the answer not in the manual?
Questions and answers