Page 1
ASSEMBLY INSTRUCTIONS WARNING: To avoid serious personal injury: • Carefully and strictly follow assembly instruc�ons. Improper assembly of furniture can result in structural failure, instability of the product, or �p- over. • Monitor and carefully control the assembly components. These include small parts and hardware that may present a choking hazard to small children.
Page 2
ASSEMBLY INSTRUCTIONS • Please read carefully the assembly instructions before the installation. • Do not discard this manual or any of the packaging material until the unit has been completely assembled. • Might require two people.
ASSEMBLY INSTRUCTIONS MAIN PARTS LIST Left panel Center panel Locking casters Right panel Non-locking casters Left shelf Back panel Bottom panel Top wood panel Support Top glass panel tube Drawer left Drawer right Drawer front Drawer Drawer back panel panel panel bottom panel panel...
Page 4
ASSEMBLY INSTRUCTIONS MAIN PARTS LAYOUT (FOR REFERENCE): “Flat” Non-locking “L shaped” Locking LIST OF HARDWARE, SCREWS AND FITTINGS PART ITEM PART ITEM M4x14 M6x25 Bolt M6x40 Bolt M4x35 M6x20 M3x15 (Headless) M4x20 M6x25 Screwdriver M4x16...
Page 5
ASSEMBLY INSTRUCTIONS BEFORE YOU START THE ASSEMBLY, PLEASE READ THE FOLLOWING TIPS AND WARNINGS. • Please read the assembly instructions throughly an follow step by step. 30mm • Make sure you understand which hardware will be used on each step. Using the wrong size of screw, bolt or M6x30 pin might strip the threads or cause...
Page 6
ASSEMBLY INSTRUCTIONS THE ASSEMBLY STEPS START ON NEXT PAGE CAM BOLT AND CAM LOCK TUTORIAL THE INSTRUCTIONS BELOW ARE NOT ACTUAL ASSEMBLY STEPS This unit uses cam bolts and locks (also known as mini fixes). If you are not familiar with this kind of hardware, the below is a tutorial that explains how to use them on the steps where they are required.
ASSEMBLY INSTRUCTIONS ASSEMBLY STEPS Grab all the sets of sliders 16 (total 12 pcs) and separate them into 2 STEP 1 groups according to their shape: - The “Flat” ones will be used on the next step. The “L Shaped” will be used until step 19, set them aside.
Page 8
ASSEMBLY INSTRUCTIONS • Attach bolts B on the other side of panel 2. STEP 3 • Make sure the cam locks on panel 5 are aligned and ready to receive Hardware: the bolts, just as as explained in page 4. •...
Page 9
ASSEMBLY INSTRUCTIONS Using bolts B, and following the procedures explained in page 4: STEP 6 • Assemble the left panel 1 to panels 5 and 6. Hardware: • Assemble the right panel 4 to panel 6. M6x40 The groove on 1 and 4 face towards the back Bolt Cam locks alignment...
Page 10
ASSEMBLY INSTRUCTIONS Assemble the tubes 9 to the metal discs of the top glass panel 10 with STEP 10 screws C (headless). Hardware: M6x20 Headless Assemble the tubes 9 from the glass panel 10 to the top wood panel STEP 11 8 with screws D from underneath.
Page 11
P.10 ASSEMBLY INSTRUCTIONS P.10 Assemble the hinges 19 on the door 18 to panel 1 with screws E. STEP 14A If the door does not close smoothly or requires alignment, follow the Hardware: instructions 14B, otherwise, continue to step 15. M4x16 STEP 14B Do this step only if the door does not close smoothly or requires...
Page 12
P.11 ASSEMBLY INSTRUCTIONS P.11 For each of the 3 drawers, STEP 16 STEP 15 assemble the side panels For each of the 3 drawers, slide the bottom Hardware: 11 and 12 to the front panel 14 through the grooves of the side panel 13 with bolts F as panels and into the front panel as shown.
Page 13
P.12 ASSEMBLY INSTRUCTIONS P.12 STEP 20 • Insert the drawers into the cabinet, starting with the bottom one, then middle, then top. Insert at an angle with their fronts facing down, making sure the wheels from the drawer slide in the middle of the sliders inside the cabinet.
Page 14
P.13 ASSEMBLY INSTRUCTIONS P.13 CARE, MAINTENANCE AND SAFETY WARNINGS: WEIGHT LIMITS 60 Lbs. 60 Lbs. (27.2 Kg) (27.2 Kg) 15 Lbs. (6.8 Kg) 15 Lbs. 30 Lbs. (6.8 Kg) (13.6 Kg) • Do not exceed the indicated weight limits. • Do not expose the surfaces to direct sunlight or to extreme environmental conditions. •...
Need help?
Do you have a question about the RTA-S10 and is the answer not in the manual?
Questions and answers