10BDL5051T
Mounting Option 2: [Using back cover]
Supporting screw: Self-tapping screw*5pcs (exclude the
mounting plate thickness)
(1). Use a screwdriver to loosen the screw on the back cover.
(2). Remove the back shell decoration from the groove
indicated by the arrows on both sides of the entire machine.
(3). Detach the back cover from the signboard.
(4). Use screws to secure the back shell trim to the wall.
(5). Plug in the cable.
(6). The entire machine is loaded with back shell decorations.
(7). Lock the screws.
10
Need help?
Do you have a question about the 10BDL5051T and is the answer not in the manual?