Dm-00765 No Duplex - DataCard CP60 Printer Manual

DM-00765 No Duplex

The duplex module is not installed or detected.
Possible Cause 1: The driver was set to use automatic duplex and a duplex
module is not installed in the printer.
Solution 1: Send a one-sided card to the printer or set the driver for manual
duplex.
Possible Cause 2: The connection between the duplex module and the rest
of the printer is damaged.
Solution 2: Check the printer to see whether a duplex module is included in
the printer. If it is, power the print off and on; the printer might detect the
module when the printer powers up.
If a duplex module is part of the printer and you receive this message,
contact your service provider for assistance.
Related Topics:
"Features and options" on page 3
Page 68