Philips 27B1N3800 User Manual page 8

Connecting to your PC
1
HDMI 1
2
USB hub
USB UP
USB A-B
1 AC power input
HDMI 1 input
2
3 HDMI 2 input
DisplayPort input
4
5 Audio Out
USB UP
6
7 USB downstream
USB downstream/USB fast charger
8
9 Kensington anti-theft lock
USB
9
Fast Charger
HDMI 2 USB UP USB
AUDIO
OUT
3 4 5 6 7
USB
Connect to PC
1. Connect the power cord to the back
of the monitor firmly.
2. Turn off your computer and unplug
its power cable.
8
3. Connect the monitor signal cable to
the video connector on the back of
your computer.
4. Plug the power cord of your
computer and your monitor into a
nearby outlet.
5. Turn on your computer and monitor.
If the monitor displays an image,
installation is complete.
USB hub
4
To comply with International energy
standards, the USB hub/ports of this
display are disabled during Standby and
Off modes�
Connected USB devices will not work in
this state�
To permanently put the USB function in
the "ON" state, please go to OSD Menu,
then select "USB standby mode", and
switch it to the "ON" state� Somehow
if your monitor resets to the factory
setting, ensure to select "USB standby
mode" to "ON" state in the OSD menu�
6