TP-Link TL-MR3040 Quick Installation Manual

Quick Installation Guide

Portable 3G/3.75G Battery Powered Wireless N Router
TL-MR3040
MODEL NO.
2

Hardware Connection

Install the Battery
Lift and remove the rear
cover of the Router as the
shown.
Insert the battery as the
1
shown and press the
2
battery until it snaps into
place.
Then install the rear
cover.
NOTE: Push the power
switch to the left to turn
on the Router.

Package Contents

TL-MR3040
Portable 3G/3.75G Battery Powered Wireless N Router
TL-MR3040
QIG Power Adapter USB Cable
Ethernet Cable
Resource CD
Battery
System Requirement
The following operating systems are supported:
• Windows XP • Windows Vista • Windows 7
• Windows 98 • Windows 2000 • Windows 2003
• Windows Me • Mac • iOS
• Linux • Android
The following browsers are supported:
• Internet Explorer • FireFox
• Safari • Chrome

Connecting the Device

3G Router Mode (Default) WISP Client Router Mode
In this mode, the TL-MR3040 is In this mode, the TL-MR3040 is wirelessly
connected to a 3G USB modem and connected to the WISP(Wireless Internet
wirelessly share the 3G mobile Service Provider) and share the Internet to
connection to multiple users. multiple users.
3G 3G 3G 3G 3G
NOTE: In Standard AP Mode, the TL-MR3040 also provides the other three sub modes: Repeater\Client\Bridge, please refer to the user guide on the Resource CD for
more details.
1

Physical Description

Power Switch
Micro USB Port
Reset Button
3G USB Port
Ethernet Port
Internet
WLAN
Ethernet
Power
Travel Router (AP) Mode
In this mode, the TL-MR3040 is connected
to a wired network and transforms the
wired Internet access into wireless so that
multiple users can share the Internet.
Wired Network
SSID: 123
Item Description
Power Switch This switch is used to power on the Router.
Micro USB Port This port is used to be connected to the provided power adapter.
With the Router powered on, press and hold the Reset button
Reset Button for at least 10 seconds , and then the Router will restore to the
default setting.
3G USB Port This port is used to plug a 3G modem/card into.
Ethernet Port This Port can be used as either a LAN port or WAN port.
LED Status Description
Solid (Green) The battery is full or the power supply is normal.
Solid (Orange) The battery is being charged.
Power
Solid (Red) The battery power is low, you need to charge it.
Flashing (Red) The battery is abnormal.
The Ethernet port is connected, but there is no
Solid
data being transferred.
Ethernet
Flashing The Ethernet port is transferring data.
Solid Wireless is enabled.
WLAN
Flashing There is data being transferred through wireless.
Internet
The Router is connected to the Internet and is
Flashing
transferring data.
Wireless Router Mode
In this mode, the TL-MR3040 is connected to a DSL
or cable modem and works as a regular wireless
router so that multiple users can wirelessly share
the Internet. The Ethernet port on the TL-MR3040
works as a WAN port.
Cable
ADSL Modem