TP-Link TD-W8960N Quick Installation Manual

Note
Please use only wired network connections to configure the Router.
Turn off all of your network devices, including your computer(s) and the
Modem Router. If you currently use a modem, disconnect it now. The
Modem Router will replace your current modem.
Connect your computer to the
Port labeled "1~4" on the
Modem Router
Ethernet cable.
Connect the splitter to the wall
jack using a telephone line,
then use the other telephone
line to directly connect it to the
LINE port of the Modem
Router and the MODEM port
of the splitter, also have the
PHONE port of the splitter
connected to a telephone.
Note
If no telephone is needed, please connect the LINE port of the Router to
the wall jack using the telephone line directly.
with an
1