Casio TE-7000S Programming Manual page 145

Character programming keyboard (Menu sheet)
PLU0001
∞ ©º
Icon (It shows a sort of the character input)
TE-7000S/8000F/8500F Programming Manual
1 Shift key
Press this key to shift the following characters
from the uppercase letter to lowercase letter
and returns to the uppercase letter in sequence.
2 Left cursor key
Press this key to shift the character setting
position to the left one by one. This key is used
to correct already entered characters.
3 Right cursor key
Press this key to shift the character setting
position to the right one by one. This key is
used to correct already entered characters.
4 Double size letter key
Press this key to specify that the next character
you input to a double size character.
5 Space key
Press this key to set a space.
6 CAP key
Press this key to shift the character to the
uppercase letter.
7 Alphabet keys
Press these keys to input characters.
The character programming keyboard has an uppercase "CAP" setting and a "SHIFT"
setting. Its initial setting is CAP setting, which remains in effect until you press the
<SHIFT> key.
After you press <SHIFT>, the shift setting remains in effect until you press the uppercase
<CAP> key again. Note that neither the <SHIFT> nor <CAP> key operation is counted as
a character during programming.
Press the <DBL> key to specify that the next character you input is a double-size character.
Each double-size character counts as two normal size characters.
Press the <INS> at the insertion point to insert a character, or press the <DEL> key at the
deletion point to delete a character.
The < > and < > key moves the insertion/deletion point.
0.00
8 Numeric keys
Press these keys to enter program codes,
memory number and character codes.
9 Yes key
Press this key when the alphabetic entry
for a descriptor, name or message has
been completed. This key is also used for
editing the programmed characters.
0 Backspace key
Press this key to move the character
placed behind.
A ESC/SKIP key
Press this key to terminate the character
programming.
B Insert key
Press this key to put one space between
the original characters.
C Delete key
Press this key to clear the designated
character.
π ∫
<SHIFT> or
∫ π
<CAP> or
∫ º
<DBL> or
<INS>
<DEL>
Q
q
ª º
º ª
π ª
P-145