Plu Maintenance; Not Found Plu Maintenance - Casio TE-3000S Dealer's Manual

Application systems

PLU maintenance

There are three ways to maintain scanning PLU, i.e. not found PLU maintenance, batch PLU maintenance and direct PLU
maintenance.

Not found PLU maintenance

When an item which code is not existed in the scanning PLU file is registered, the "Not found" error occurs. You can
register this item by not found PLU maintenance procedure. After this maintenance, this item is registered without the "Not
found" error.
This item is stored in the not found PLU file, so you can check which item is registered and how many item is sold to read
this file. Also, you can merge the contents of the not found PLU file to the scanning PLU file by the not found PLU mainte-
nance.
Satellite
Scanning
PLU file
Not found PLU
maintenance file
1 Consolidate not found PLU file of all terminal to the master. (After this operation, not found items of all terminal are
collected to the not found PLU maintenance file of the master.)
2 Issue report of the not found PLU maintenance file.
3 Edit the not found PLU maintenance file.
4 Broadcast the not found PLU maintenance file to all terminal of the cluster manually.
5 Activate the not found PLU maintenance file from the master terminal. (After this operation, not found items are merged
to the scanning PLU file.)
6 Reset the not found PLU maintenance file.
Note:
1. Only addition to the scanning PLU file can be made by the not found PLU maintenance.
2. In case of using stand-alone (master only) system, you can skip the step 4.
3. Even in stand-alone system, terminal connection table program is necessary.
Batch maintenance
Batch maintenance is used for adding items to the scanning PLU file, changing the scanning PLU item programming data
or deleting items from the scanning PLU file.
Satellite
Scanning
PLU file
Batch mainte-
nance PLU file
1 Program the batch maintenance PLU file.
2 Broadcast the batch maintenance PLU file to all terminals of the cluster manually.
3 Activate the batch maintenance file.
Note:
1. In case of using stand-alone (master only) system, you can skip the step 2.
2. Even in stand-alone (master only) system, terminal connection table program is necessary.
192
Master
Scanning
PLU file
5
Not found PLU
4
maintenance file
Master
Scanning
PLU file
3
Batch mainte-
2
nance PLU file
5
1
3