Z Consolidation Processing (For Scanning Plu) - Casio TE-3000S Dealer's Manual

Consolidation
Z consolidation processing (except for scanning PLU)
Z consolidation processing is performed as the figure shown below.
Satellite
Terminal
1 A Z consolidation command is started up from the master terminal.
The master first locks objected terminals.
2 Data of the master's terminal files are copied to the consolidation file.
3 Data of the satellite's terminal files are sent to the master terminal, and are added to the consolidation file.
4 The same process described in step 3 is executed for other terminal.
5 The data accumulated in the consolidation file are reported on the master's R/J printer.
If reporting on the satellite is programmed, the reports are printed out on the satellite R/J printer in accordance with the
program. The files of the master terminal are cleared, if the master is included in the target terminal. The files of the
satellite terminal are cleared.
6 After the above consolidation processing completes for all target terminals, the stock data in the consolidation file is
copied to the terminal file of the master and then satellite's Z lock statuses are released.

Z consolidation processing (for scanning PLU)

Scanning PLU has Z consolidation only, because there is no consolidation file for scanning PLU.
Z consolidation for scanning PLU processing is performed as the figure shown below.
(Only "consolidate all terminals" is possible.)
1 A Z consolidation command is started up from the master terminal.
The master first locks objected terminals. No report is printed out on the satellite R/J printer.
2 Data of the satellite's terminal files are sent to the master terminal, and are added to the terminal file. The sent part of the
satellite terminal's file are cleared.
3 The same process described in step 2 is executed for other terminal.
4 The data accumulated in the consolidation file are reported on the master's R/J printer in accordance with the program.
5 After the above consolidation processing completes for all target terminals, satellite's Z lock statuses are released.
186
1, 6
files
2
3
1, 5
Satellite
2
Terminal
files
Master
Terminal
5
files
Consolidation
files
Master
4
Terminal
files